Main/Knoxville:  (865) 588-7000
Nashville:  (615) 557-4296
(800) 588-7001



The Occupational Safety and Health Administration (OSHA) recently unveiled its top 10 most frequently cited violations. The agency reports the leading causes of workplace injuries during its fiscal year (October through the following September).

The 2016 top 10 list of most frequently cited standards did not change significantly from 2015, with fall protection violations remaining at the top of the list. In fact, the top seven most cited violations remained the same. The 2016 top 10 most frequently cited standards are as follows.

Top 10 OSHA Violations


1. Fall Protection (29 CFR 1926.501): 6,929 citations
Falls from ladders and roofs still account for the majority of injuries at work. Identifying fall hazards and deciding how to best protect workers is the first step in eliminating or reducing fall hazards. This includes - but is not limited to - guardrail systems, safety net systems and personal fall protection systems in conjunction with safe work practices and training.

2. Hazard Communication (29 CFR 1910.1200): 5,677 citations
In order to ensure chemical safety in the workplace, information must be available about the identities and hazards of all chemicals in use. OSHA standard 1910.1200 governs hazard communication to workers about chemicals that are both produced or imported into the workplace. Both the failure to develop and maintain a proper written training program for employees, as well as the failure to provide a Safety Data Sheet (SDS) for every hazardous chemical, top the citation list.

3. Scaffolding (29 CFR 1926.451): 3,906 citations
According to the Bureau of Labor Statistics (BLS), the vast majority of scaffold accidents can be attributed to the planking or support of the scaffold giving way, or to employees slipping or being struck by falling objects. The dangers associated with scaffold use can be controlled if employers strictly enforce OSHA standards.

4. Respiratory Protection (29 CFR 1910.134): 3,585 citations
Standard 1910.134 provides employers with guidance in establishing and maintaining a respiratory inspection program for program administration, work site-specific procedures and respirator use. Respirators protect workers from oxygen-deficient environments, harmful dusts, fogs, smokes, mists, gases, vapors and sprays. These hazards could cause cancer, lung impairment and other diseases or death.

5. Lockout/Tagout (29 CFR 1910.147): 3,414 citations
Lockout/Tagout (LOTO) refers to specific practices and procedures that safeguard employees from the unexpected startup of machinery and equipment, or the release of hazardous energy during service and maintenance activities. Workers who service mechanical and electrical equipment face the greatest risk of injury if LOTO is not properly implemented. Workers injured on the job from exposure to hazardous energy lose an average of 24 workdays for recuperation.

6. Powered Industrial Trucks (29 CFR 1910.178): 2,860 citations
Each year, tens of thousands of injuries related to powered industrial trucks (particularly forklifts) occur. Many employees are injured when lift trucks are driven off of loading docks or when they fall between docks and unsecured trailers. Other common injuries involve employees being struck by lift trucks or falling from elevated pallets and tines. Most incidents also involve property damage, including damage to overhead sprinklers, racking, pipes, walls and machinery.

7. Ladders (29 CFR 1926.1053): 2,639 citations

These types of violations typically occur when ladders are used for purposes other than those designated by the manufacturer - such as when the top step of a stepladder is used as a step, when ladders are not used on stable and level surfaces, or when defective ladders are not withdrawn from service. Most employee injuries can be attributed to inadequate training and a disregard for safe operating procedures.

8. Machine Guarding (29 CFR 1910.212): 2,451 citations

When left exposed, moving machine parts have the potential to cause serious workplace injuries, such as amputations, burns, blindness and crushed fingers or hands. The risk of employee injury is substantially reduced by installing and maintaining the proper machine guarding.

9. Electrical - Wiring Methods (29 CFR 1910.305): 1,940 citations
Electricity has long been recognized as a serious workplace hazard. OSHA's electrical standards are designed to protect employees exposed to dangers such as electric shock, electrocution, fires and explosions. Electrical wiring violations that top the electrical citation list include the failure to install and use electrical equipment according to the manufacturer’s instructions, failure to guard electrical equipment, failure to identify disconnecting means or circuits, and not keeping work-spaces clear.

10. Electrical - General Requirements (29 CFR 1910.303): 1,704 citations
This standard contains many guidelines to ensure that all electrical components at a work site are installed and maintained safely. The standard also outlines the amount of clear space needed around electrical equipment.

Are you maintaining your programs and training workers on a regular basis? Are you confident in your OSHA record keeping abilities? Would OSHA find any of these at your workplace(s)? 

See 2015 results:  https://www.osha.gov/Top_Ten_Standards.html
See OSHA's Fall Prevention Campaign:  https://www.osha.gov/stopfalls/index.html
Posted 8:06 AM  View Comments

Share |


No Comments


Post a Comment
Name
Required
E-Mail
Required (Not Displayed)
Comment
Required


All comments are moderated and stripped of HTML.
Submission Validation
Required
CAPTCHA
Change the CAPTCHA codeSpeak the CAPTCHA code
 
Enter the Validation Code from above.
NOTICE: This blog and website are made available by the publisher for educational and informational purposes only. It is not be used as a substitute for competent insurance, legal, or tax advice from a licensed professional in your state. By using this blog site you understand that there is no broker client relationship between you and the blog and website publisher.
Blog Archive


View Mobile Version

   
         Main Office:   9700 Westland Dr, Suite 102, Knoxville, TN 37922
Nashville Office:   c/o Industrious, 1033 Demonbreun St, Suite 300, Nashville, TN 37203
 
This website is intended to stimulate dialogue about your protection and does not alter or interpret your insurance policies. Always refer to your policy for details about your coverage.